Does the Apple logo on your iPhone flashing continuously while charging on your Apple Watch? Some of the affected users have taken up this point in the Apple community, where the Apple Logo seems to flash again and again while the device is on charge. We have discussed the steps to troubleshoot the problem on your own.
Why the Apple logo is flashing and blinking in Apple Watch?
There is a chance that this problem is linked directly to the battery on your Apple Watch. While a set of the Apple Watch users have solved this just by force-restarting the device, another set had to resort to other options.
So, if you are in this situation where the Apple Logo is flashing continuously while the device to charge, you can follow these steps to get you out of this predicament.
Fix 1 – Force restart Apple Watch
The best way to get rid of this problem is to force restart the Apple Watch.
Step 1 – Start by pressing both the side and crown button on your Apple Watch.
Step 2 – If you press the buttons for enough time, you will see the watch has restarted.
When the device has finally rebooted, you won’t see the Apple logo blinking on your watch.
Fix 2 – Drain the Apple Watch completely
You have to drain the Apple Watch battery completely. This is one of the solutions that you can try on your device.
Step 1 – Though there is no definitive way to drain the battery on your Apple Watch, there are some things that you can do.
Step 2 – Set the brightness to the maximum settings on the watch.
(Settings > Display & Brightness > Switch to the maximum brightness)
Step 3 – Turn on the Wi-Fi, Bluetooth and any other peripherals on your Watch.
Step 4 – You may turn on the flashlight and leave it open for a while to drain it quickly.
See if this works out for you.
Fix 3 – Unpair the Apple Watch
You have to delete the Apple Watch pairing from your iPhone.
NOTE – We are going to erase the data on your Apple Watch. Almost all of your data is synced through your iCloud account, so you can restore them with minimal efforts.
Step 1 – To do this, load up the Apple Watch on your iPhone.
Step 2 – Make sure you are in the “My Watch” panel.
Step 3 – Then, open up the “General” tab.
Step 4 – You will be able to find the “Reset” option at the bottom.
Step 5 – Then, tap the “Erase Apple Watch Content and Settings” option.
Step 6 – There you will see a warning message. Tap “Erase All Content & Settings” option.
Now, it will ask you for the Apple ID password for security purposes.
Step 7 – Once the process is complete, you can pair the Apple Watch with your iPhone again.
Finally, your problem will be solved. See if this works out.