Is the speaker on your iPhone sounds too low? If the speakers are delivering very less amount of sound than their usual level, it is a problem that you can’t ignore. Whether you are receiving a call from a friend or streaming some videos, the importance of the speaker system can’t be overlooked. You can’t imagine your iPhone without a proper speaker setup. Enact these workarounds for the quickest resolution, but if that doesn’t work out, follow the main solutions.
Workarounds –
1. Press and hold the Volume UP key on your iPhone to maximize the volume.
2. You can use the Volume slider from the Control Center to set it to full volume.
Check the sound level now.
Fix 1 – Change the Call Audio routing setting
iPhone can route the calls automatically to the connected devices. So, if that setting is misconfigured, the speakers may offer low sound.
Step 1 – Load up the Settings tab.
Step 2 – Later, touch the “Accessibility” feature to open them up.
Step 3 – Scroll down until you get to the “Touch” option.
Step 4 – Slide down to the “Call Audio Routing” module.
Step 5 – Set the ‘Call Audio Routing‘ to “Automatic” mode.
This way, the iPhone can choose the sound output device automatically when the device is connected to external utilities. Check the speaker’s functionality from there.
Fix 2 – Disable the Hearing Aid Compatibility feature
If you are not using any hearing devices, you must disable that toggle.
Step 1 – Open up the Settings page.
Step 2 – Later, touch the “Accessibility” settings.
Step 3 – This time, open up the “Hearing devices” module.
Step 4 – In the Hearing Devices page, you must disable both the “Bluetooth” and “Hearing Aid Compatibility” options.
Once it is disabled, maximize the volume slider and check the level of sound output from the speaker.
Fix 3 – Disable Loud Sounds
One of the primary features of ‘Headphones Safety’ is to reduce loud sound.
Step 1 – To do this, load up the Settings window.
Step 2 – Slide down until you reach the “Sounds & haptics” option.
Step 3 – Go to pit of the page and open up the “Headphone Safety” option.
Step 4 – Turn off the “Reduce Loud Audio” feature.
Step 5 – But, if you need this feature enabled, you can set the slider to 90 DB value.
After disabling this feature, the speaker will perform normally once again.
Fix 4 – Check the Alert Slider/Action Button status
You must check whether you have engaged the Slider or Action button to put your iPhone in silent mode.
Step 1 – On your iPhone, check the status of the Alert Slider.
Step 2 – If your iPhone is in Silent mode, use the button or slider to put the iPhone out of Silent mode. You can’t increase the ringer volume unless you are out of the Silent Mode.
Test out the speakers of the iPhone. See if this is working or not.
Fix 5 – Clear the speakers
Speakers can emit low sound volume if they have got jammed during prolonged usage of the iPhone. Dust or other particle accumulation can lead to this issue. So, clear up the speaker grills using cloth to clear off the speaker. You can use an air blower to achieve the same feat as well.