The ease of using Apple Watches includes this basic but essential lift to wake feature. You can just lift your wrist slightly and the screen will bring up the time and other data right on the watch face. The inconvenience of not being able to use the wrist wake function can not be understated. So, this guide will help you troubleshoot this problem at your end.
Fix 1 – Turn on Wake on Wrist Raise
The Wake on Wrist Raise function is essential on your Apple Watch. So, it must be turned on to fix the problem.
Step 1 – Tap the crown switch on your Apple Watch.
Step 2 – After it opens up, tap the “Display & Brightness” feature.
Step 3 – On the following page, you have to scroll down and find the “Wake on Wrist Raise” feature.
Step 4 – Tap to turn it off once.
Step 5 – Wait for a few seconds and then, re-enable the “Wake on Wrist Raise” function.
Test this out instantly. If this one doesn’t work, you can go for the next solution.
Fix 2 – Check the orientation of the watch
The wrist wake feature depends upon the orientation of the Apple Watch. In more precise terms, it needs to know you where you use this watch.
Step 1 – Open up the app list on the watch by tapping the crown button on the watch.
Step 2 – Tap the “Settings“.
Step 3 – Lead to the “Orientation” settings in there.
Step 4 – Now, choose the correct orientation of the Apple Watch. You must choose where you wear the watch.
Step 5 – So, select the correct orientation there.
After finding the correct orientation, the problem with the wake function should be gone.
Fix 3 – Turn off Theater mode
The ‘Wake on Wrist Raise’ function is blocked while you have enabled it on your Apple Watch.
Step 1 – Just tap the side button on the watch.
Step 2 – In the Control Center page, look for the Theatre mode.
Step 3 – If it is activated, turn it off the Theatre mode from there.
After disabling the theater mode, the problem will be gone from your Apple Watch.
Fix 4 – Do a normal restart
You can just do a normal restart operation on the watch to fix it.
Step 1 – At first, you have to hold down the side button briefly.
Step 2 – Next, tap the power button there.
Step 3 – Finally, use the “Power off” slider to power off the watch.
Step 4 – After it shuts down, press and hold the same side button to restart it.
After it restarts, lift your wrist to wake up the watch. See if this works or not.